Description

Prime Bubble-X® is a 100% recyclable polypropylene sheet / air-bubble co-extruded PP board featuring a newly patented technology. Bubble-X is made of three layers: a central thermoformed core, and two flat, compact external skins with matte finishes. These external layers are smooth and corona-treated to provide an outstanding direct to printing finish surface for outdoor and indoor signage, exhibit, and display applications. ASAP Reprographics prints directly on to 4 mm white Bubble-X board with our HP Latex R1000 Plus Printer, using ECO environmentally, long lasting Latex inks. Bubble-X is a fully recyclable, rigid graphics media board which offers superior performance over most traditional foam options.

Our printed Bubble-X comes with a matte finish. Bubble-X board can be custom cut to any size and printed on one or two sides. Consider Bubble-X printing when looking for an economical way to showcase your artwork without a frame, but still come across as a professional print.

Because of the wide potential size range of our large format products, there are additional file setup considerations. Proofs are typically shown half size. For other details, please review the file setup section carefully.

Recommendations

Bubble-X improved design provides the structural support that you expect from a signage and display substrate: no bowing, no bending. Bubble-X offers a consistent and more visually appealing printed brightness, perfect for projecting your image or artwork in full color, allowing the colors to remain vibrant and the images in high quality.

Marketing Tips

Prime Bubble-X is ideal for applications that require high strength-to-weight ratios and enhanced printability for creative displays.

Recommended Uses

  • Point-of-purchase displays
  • Indoor signage
  • External signage
  • Wall and floor assemblies

Custom Sizes

Our Bubble-X prints are available in custom sizes ranging from 12" x 12" up to 48" x 96"

Note: Sizes larger than 46" x 46" cannot be shipped and are available for store pickup only.

4 mm White Bubble-X Board

Our 4 mm White Bubble-X Board prints is a co-extruded PP board over a thermoformed core with a unique matte finish for exceptional durability, printed 4/0 or 4/4 (full-color one or both sides). The printing surface delivers a stunning final product, resulting in a vibrant, textured artwork print true to color. Bubble-X has a high strength-to-weight ratio. The boards are easy to cut for custom fitting into existing displays and can be printed on both sides. The tough core resists denting, bending and crushing with a superior compression strength.

4/4

Full color (cyan, magenta, yellow, and black as above) on the front and the back.

4/0

Full color (cyan, magenta, yellow, and black as above) on the front and no printing on the back.

Grommets

Grommets are round, metal hole reinforcements. For our grommets we use Silver Nickel Grommets Size #2 (3/4" outside diameter) with a hole diameter of 3/8". Grommets are available for top corners only, bottom corners only or all 4 corners only.

Rounded Corners

Rounded corners use extra finishing to convert regular square corners into rounded corners. We offer 1/2" rounded corners on all for corners.

If you prefer rounded corners on only 1, 2, or 3 corners, please note it in the additional instructions section when placing your order.

Explanation of Turnaround Time

Turnaround times begin when the proof is approved. Turnaround time starts for proofs approved after 11:00 a.m. (PST). All times are based on standard business days Monday through Friday excluding federal holidays. Please note that turnaround time does not include shipping or mailing time. You may select from available production turnaround times and your preferred shipping time as you place your order. Order cutoff time is 10:30 a.m. (PST).

Note: Add one day to turnaround time for orders over 100 Sq. Ft.

Our products are the same great quality for every turnaround time we offer.

Note: Although we make every possible effort to turn jobs around in the estimated times offered, your job may require more time due to unforeseeable or uncontrollable circumstances or finishing services added onto the job. We will not credit customers or give discounts if a job runs past the estimated turnaround time. Turnaround times are an estimate, not a guarantee!

Same Day Turnaround

If you order a proof (Online PDF or Hard Copy Proof), your turnaround time begins as soon as you approve your proof in our system. Turnaround time starts same day for proofs approved after 11:00 a.m. (PST). If you order "No Proof, Run As Is" (only recommended if you are certain you want us to print what you sent as is), your turnaround time begins as soon as your order begins the imposition process. Once your order is in imposition, you should receive a confirmation email that your order is in print production. Add one extra day for shipping or mailing processing.

Guidelines

Files must be uploaded before the cut off time of 10:30 a.m. (PST). If you request a proof, you must approve your proof by 11:00 a.m. (PST) for turnaround time to begin.

Same Day Turnaround Shipped Orders
Orders will ship the same business days after 4:00 p.m. if you follow the guidelines.

Files uploaded after the cut off time will be processed the following business day.

Next Day Turnaround

If you order a proof (Online PDF or Hard Copy Proof), your turnaround time begins as soon as you approve your proof in our system. Turnarount time starts next day for proofs approved after 11:00 a.m. (PST). If you order "No Proof, Run As Is" (only recommended if you are certain you want us to print what you sent as is), your turnaround time begins as soon as your order begins the imposition process. Once your order is in imposition, you should receive an email with your estimated order completion date (does not include shipping or mailing).

Guidelines

Files must be uploaded before the cut off time of 10:30 a.m. (PST). If you request a proof, you must approve your proof by 11:00 a.m. (PST) for turnaround time to begin.

Next Day Shipped Orders
Orders will ship the next business days after 4:00 p.m.if you follow the guidelines.

Files uploaded after the cut off time will be processed the following business day.

Large Format Quantity

For quantity, simply enter the quantity you would like in "Quantity" area of the pricing calculator.

If you would like to order product options not available in the pricing calculator, simply request a custom estimate. To request a custom estimate, go to Request a Quote at the top of the page.

PDF stands for Portable Document Format. This template can be imported into: InDesign, Quark Express, Illustrator, Corel Draw, and many other content creation programs.

JPEG stands for Joint Photographic Experts Group and is a basic raster file format. This template is recommended for Photoshop.

EPS stands for Encapsulated PostScript. This template is recommended for advanced Illustrator users only.

Please Click Here for our product layout templates.

File Preparation

In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file.

We also accept .JPG (JPEG), .EPS and .TIF (TIFF) file types, however PDF is the preferred format.

Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results.

  1. Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.
  2. Use a minimum resolution of 300 dpi for image files.
  3. All fonts need to be outlined or embedded.
  4. Specify trim area with crop marks. (Don't place crop marks inside the work area.)
  5. Artwork should have 1/8" (0.125") bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
  6. Safe Area is the 1/8" (0.125") area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
  7. If you want printed borders, they must be placed a minimum of 1/8" (0.125") inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.

For a checklist on file setup, please Click Here.

File Orientation

Please click the link below for an explanation of file orientation.

Bleed and Safe Area

We require that you extend any images that run up to the trim line a minimum of 1/8" (0.125") past the trim line to create "bleed". Depending on what program you use to create your file, this may or may not change the total image area of your file. Programs like Photoshop that do not allow the creation of "bleed" or the addition of crop marks will require an image area that is 1/4" (0.25") larger than your desired final overall image area in both dimensions.

Safe Area is the 1/8" (0.125") area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge. If you choose to make less than this minimum clearance, we will NOT be responsible for items that are cut off in this area.

For assistance in file setup, please Click Here for our product layout templates.

Proofs and File Check

  1. Online PDF Proof: You will be sent a link to view your proof via email. Please keep in mind that this is only a proof for content and positioning; the color on your screen may vary from the color of your final product, depending on your monitor and viewing conditions.
  2. Hard Copy Proof: The Hard Copy Proof can either be picked up on-site or shipped to you. Please keep in mind that this is a proof for content and positioning and is not printed on your actual job stock. Color may vary slightly when printed on the stock you ordered. When ordering a Hard Copy Proof, you will receive a complimentary Online PDF Proof, as well.
  3. No Proof, Run As-Is: This option is for the industry professional who is certain their project is ready to hit the press and does not require the additional security of a proof.

File Check:

If our prepress department sees anything questionable with your file, we will contact you via email with our concerns. Should prepress email you, please note that your job is not considered fully submitted until you respond to this email. This should be factored into your turnaround time.

Please Note: The charge for our technical team to review your file when first submitted is included in the price of your order. If they note technical concerns with your file, they may email you with their concerns so you can upload a corrected file. If subsequent uploads still contain errors, you may be charged an additional prepress fee to review your file again.

Design Online

You can create a personalized design in just a few minutes. Once you click the "Start Your Design" button, you're taken to a huge library of design templates. You can search by specific category or select "generic" for personal use. Making changes to the text, font size and uploading a picture or logo on your chosen template is as easy as using a basic computer program. After you're done making changes, you are able to instantly view an online proof and order it for print.

There are professional design templates for almost any personal and business need.

Start Your Design

Assisted Design

If you like one of the Design Online templates but would prefer not to handle the designing yourself, this option is ideal. Simply let us know which template you like and supply the information you would like to appear on your design. We will handle the rest!

Keep in mind that the images on the template will remain the same. Only text can be edited and basic logos added.

There are professional design templates for almost any personal and business need.

Check out all your Design Online template options.

Click Here

Custom Design

We create fully custom designs that help represent your company, brand or product in a professional way. Custom Design includes consulting to come up with a concept and design revisions, so you're truly part of the process. You can also add either a basic or corporate custom designed logo to your design.

There are 3 design packages to meet your needs:

1. Full Custom Design:

With this option you get complete, professional custom design for the product of your choosing. This includes consulting to discuss the concept, images, text, and revisions.

2. Full Custom Design plus a Basic Logo

With this option you get the complete design just like Custom Design Option 1 plus a basic logo. Basic logo design consists of a single font with a simple icon. See the examples under the "Logo Samples" tab.

3. Full Custom Design plus a Corporate Logo

With this option you get the complete design just like Custom Design Option 1 plus a corporate logo. Your corporate logo design has no limit to font styles so long as they are in our library. You also get a fully designed graphic to accompany your text. See the examples under the "Logo Samples" tab.

To see Custom Design pricing, number of images and revisions for this product, select "Custom Design" on the dropdown menu in the calculator and click the link underneath the menu.

Keep in mind that this price is estimated and includes limits on the amount of images and revisions that can be made before incurring additional charges. We will notify you prior to performing any services that cost more money.

Basic Logo Samples

Corporate Logo Samples

Note: Sizes larger than 46" x 46" cannot be shipped and are available for store pickup only.

Price Calculator

x
Total : $ 13.64
Please enter zipcode
Estimated Total : $ 13.64
Get Started