Description

Window Perf is an adhesive-backed, perforated synthetic substrate with full color printing on one side. It is designed to let you put your printed message on a window visible from the outside but still be able to see out from the inside. You can use it on architectural glass and side or rear automotive windows. For automotive use, please check local regulations. Window Perf comes in a range of sizes from 1' x 1' to 100' by 54" (inches).

Be sure to check local zoning and vehicle codes before applying.

Note:
Because of the wide potential size range of our large format products, there are additional file setup considerations. Proofs are typically shown half size. For other details, please review the file setup section carefully.

Due to material, all substrates may expand or shrink from batch to batch, which makes exact cuts very difficult. We do not recommend borders. If you would like borders, please make sure they are at least 2" thick. We will not reprint if the borders are not exactly the same on all sides after cutting.

Recommendations

The most common order options are 4' x 8' on 50/50 Perforated Adhesive. Window Perf is printed in full color on one side (4/0).

Marketing Tips

Window Perf is designed to let you put your printed message on a window visible from the outside but still be able to see out from the inside. You can use it on architectural glass or automotive glass. Your advertising doesn't have to block your view to get the message out.

Consider adding a QR code to your design to link directly to additional online information. This can be a great way to provide more detail than you would want to cram onto your Window Perf. Since a QR code can link to an online message, you can change the online message without the need to reprint the QR code.

Custom Sizes

Our Window Perf is available in custom sizes ranging from 1' x 1' up to 150' wide x 53" high.

50/50 Perforated Adhesive

Great for both outdoor and indoor use, Window Perf is designed to display a printed image viewed from the outside while still allowing people on the inside to see through the window. The adhesive is strong enough to hold the display in place without leaving excessive residue upon removal.

Specifications

  • Material Type: PVC Window Perf 50/50
  • Thickness: 6 mil
  • Perforation Size: Approx. 0.062 in (1.6 mm)
  • Expected Exterior Exposure: Up to 1 year 3 months for clean removal.
  • Finish: Gloss

4/0

Full color (cyan, magenta, yellow, and black as above) on the front and no printing on the back. A typical example of this is a poster.

Clear Coating

Our Window Perf is finished with a clear, scratch resistant coating.

Fully Finished

This product comes fully finished.

Explanation of Turnaround Time

Turnaround times begin when the proof is approved. Turnaround time starts next day for proofs approved after 11:00 a.m. (PST). All times are based on standard business days Monday through Friday excluding federal holidays. Please note that turnaround time does not include shipping or mailing time. You may select from available production turnaround times and your preferred shipping time as you place your order. Order cutoff time is 10:30 a.m. (PST).

Our products are the same great quality for every turnaround time we offer.

Note: Although we make every possible effort to turn jobs around in the estimated times offered, your job may require more time due to unforeseeable or uncontrollable circumstances or finishing services added onto the job. We will not credit customers or give discounts if a job runs past the estimated turnaround time. Turnaround times are an estimate, not a guarantee!

Same Day Turnaround

If you order a proof (Online PDF or Hard Copy Proof), your turnaround time begins as soon as you approve your proof in our system. Turnaround time starts next day for proofs approved after 11:00 a.m. (PST). If you order "No Proof, Run As Is" (only recommended if you are certain you want us to print what you sent as is), your turnaround time begins as soon as your order begins the imposition process. Once your order is in imposition, you should receive an email with your estimated order completion date (does not include shipping or mailing).

Guidelines

Files must be uploaded before the cut off time of 10:30 a.m. (PST). If you request a proof, you must approve your proof by 11:00 a.m. (PST) for turnaround time to begin.

Same Day Shipped Orders
Orders will ship the same business days after 4:00 p.m. if you follow the guidelines.

Files uploaded after the cut off time will be processed the following business day.

Next Day Turnaround

If you order a proof (Online PDF or Hard Copy Proof), your turnaround time begins as soon as you approve your proof in our system. Turnaround time starts next day for proofs approved after 11:00 a.m. (PST). If you order "No Proof, Run As Is" (only recommended if you are certain you want us to print what you sent as is), your turnaround time begins as soon as your order begins the imposition process. Once your order is in imposition, you should receive an email with your estimated order completion date (does not include shipping or mailing).

Guidelines

Files must be uploaded before the cut off time of 10:30 a.m. (PST). If you request a proof, you must approve your proof by 11:00 a.m. (PST) for turnaround time to begin.

Next Day Shipped Orders
Orders will ship the next business day after 4:00 p.m. if you follow the guidelines.

Files uploaded after the cut off time will be processed the following business day.

Large Format Quantity

For quantity, simply enter the quantity you would like in "Quantity" area of the pricing calculator.

If you would like to order product options not available in the pricing calculator, simply request a custom estimate. To request a custom estimate, go to Request a Quote at the top of the page.

PDF stands for Portable Document Format. This template can be imported into: InDesign, Quark Express, Illustrator, Corel Draw, and many other content creation programs.

JPEG stands for Joint Photographic Experts Group and is a basic raster file format. This template is recommended for Photoshop.

EPS stands for Encapsulated PostScript. This template is recommended for advanced Illustrator users only.

Please Click Here for our product layout templates.

File Preparation

In order to ensure your files are print-ready, we recommend that you upload them in PDF format. When you generate a print-ready PDF, your computer will use the settings in Adobe Acrobat Distiller or any other PDF generating programs you may use. Please make sure that these are set properly before generating your PDF file.

We also accept .JPG (JPEG), .EPS and .TIF (TIFF) file types, however PDF is the preferred format.

Check your file to make sure it meets our file creation guidelines. This will help speed up the production of your project and give your printed piece the best results.

  1. Use the CMYK colorspace (Cyan, Magenta, Yellow, blacK). These are industry standard printing colors. CMYK colors are different than RGB (Red, Green, Blue), which are used to display colors on your screen.
  2. Use a minimum resolution of 300 dpi for image files.
  3. All fonts need to be outlined or embedded.
  4. Specify trim area with crop marks. (Don't place crop marks inside the work area.)
  5. Artwork should have 1/8" (0.125") bleed extending past the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
  6. Safe Area is the 1/8" (0.125") area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
  7. If you want printed borders, they must be placed a minimum of 1/8" (0.125") inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.

For a checklist on file setup, please Click Here.

File Orientation

Please click the link below for an explanation of file orientation.

Bleed and Safe Area

We require that you extend any images that run up to the trim line a minimum of 1/8" (0.125") past the trim line to create "bleed". Depending on what program you use to create your file, this may or may not change the total image area of your file. Programs like Photoshop that do not allow the creation of "bleed" or the addition of crop marks will require an image area that is 1/4" (0.25") larger than your desired final overall image area in both dimensions.

Safe Area is the 1/8" (0.125") area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge. If you choose to make less than this minimum clearance, we will NOT be responsible for items that are cut off in this area.

For assistance in file setup, please Click Here for our product layout templates.

Proofs and File Check

  1. Online PDF Proof: You will be sent a link to view your proof via email. Please keep in mind that this is only a proof for content and positioning; the color on your screen may vary from the color of your final product, depending on your monitor and viewing conditions.
  2. Hard Copy Proof: The Hard Copy Proof can either be picked up on-site or shipped to you. Please keep in mind that this is a proof for content and positioning and is not printed on your actual job stock. Color may vary slightly when printed on the stock you ordered. When ordering a Hard Copy Proof, you will receive a complimentary Online PDF Proof, as well.
  3. No Proof, Run As-Is: This option is for the industry professional who is certain their project is ready to hit the press and does not require the additional security of a proof.

File Check:

If our prepress department sees anything questionable with your file, we will contact you via email with our concerns. Should prepress email you, please note that your job is not considered fully submitted until you respond to this email. This should be factored into your turnaround time.

Please Note: The charge for our technical team to review your file when first submitted is included in the price of your order. If they note technical concerns with your file, they may email you with their concerns so you can upload a corrected file. If subsequent uploads still contain errors, you may be charged an additional prepress fee to review your file again.

Design Online

You can create a personalized design in just a few minutes. Once you click the "Start Your Design" button, you're taken to a huge library of design templates. You can search by specific category or select "generic" for personal use. Making changes to the text, font size and uploading a picture or logo on your chosen template is as easy as using a basic computer program. After you're done making changes, you are able to instantly view an online proof and order it for print.

There are professional design templates for almost any personal and business need.

Start Your Design

Assisted Design

If you like one of the Design Online templates but would prefer not to handle the designing yourself, this option is ideal. Simply let us know which template you like and supply the information you would like to appear on your design. We will handle the rest!

Keep in mind that the images on the template will remain the same. Only text can be edited and basic logos added.

There are professional design templates for almost any personal and business need.

Check out all your Design Online template options.

Click Here

Custom Design

We create fully custom designs that help represent your company, brand or product in a professional way. Custom Design includes consulting to come up with a concept and design revisions, so you're truly part of the process. You can also add either a basic or corporate custom designed logo to your design.

There are 3 design packages to meet your needs:

1. Full Custom Design:

With this option you get complete, professional custom design for the product of your choosing. This includes consulting to discuss the concept, images, text, and revisions.

2. Full Custom Design plus a Basic Logo

With this option you get the complete design just like Custom Design Option 1 plus a basic logo. Basic logo design consists of a single font with a simple icon. See the examples under the "Logo Samples" tab.

3. Full Custom Design plus a Corporate Logo

With this option you get the complete design just like Custom Design Option 1 plus a corporate logo. Your corporate logo design has no limit to font styles so long as they are in our library. You also get a fully designed graphic to accompany your text. See the examples under the "Logo Samples" tab.

To see Custom Design pricing, number of images and revisions for this product, select "Custom Design" on the dropdown menu in the calculator and click the link underneath the menu.

Keep in mind that this price is estimated and includes limits on the amount of images and revisions that can be made before incurring additional charges. We will notify you prior to performing any services that cost more money.

Basic Logo Samples

Corporate Logo Samples

Maximum Width 1200" x Maximum Height 54"

Price Calculator

x
Total : $29.52
Please enter zipcode
Estimated Total : $29.52
Get Started
a year ago

ASAP is the best in town for all your printing needs! From business cards, invitations, artwork, banners and more - they do it all! I have been so pleased with the service, quality and turn around time every time I have used ASAP for personal and business projects. The team here is truly the best!!!

2 years ago

Fast turn around time. I put in my order at 3pm and it was ready by 9:30 am the next day. Knew what I wanted without having to explain much. Friendly customer service.

3 months ago

Working with Jason on mailings for the last couple months. Very satisfied.

3 years ago

ASAP Repographics is the best of the best when it comes to any and all printing needs. Their prices are phenomenal, their team incredibly responsive and patient, and their turnaround times are super quick. I work with them regularly for large quantities of printing and cannot recommend them highly enough!

3 years ago

Roger was so helpful! We had a tight deadline and he made it happen. He was very responsive to every phone call and email, was intentional to communicate detailed information that we needed. We so appreciate working with him & his team!